Iflight SucceX F7 V2.1 60A V2 Plus

The SucceX F7 V2.1 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your next build. This FC is ready for anything with 5 uarts With its clean intuitive layout, the SucceX F7 V2.1 TwinG makes installation a breeze with a 4 pin connector for your VTX and an10 pin connector that allows simple plug and play connection with your 4in1 ESC.
But the real magic of this flight controller lies in its TWIN GYRO configuration.
The TwinG uses two identical gyros oriented side by side with one offset 90 degrees from the other. Betaflight uses GYRO FUSION to blend and average the information from both gyros to send a much cleaner signal to the PID loop controller! Less noise and fewer oscillations across the throttle band without adding any delay! Betaflight software filters can be lowered in most cases as well, which brings a significant decrease in delay.
With plenty of processing power and uarts, this is the perfect flight controller for long-range GPS builds. And the TwinG configuration makes it the perfect Fc for builds like macro quads, cinematic filming rigs and x-class racers that are a bit trickier to tune.
SucceX F7 V2.1 TwinG Specifications 
-MCU：216MHz STM32F722
-Gyro：TwinG ICM20689
-Blackbox：32MB
-Betaflight OSD：YES
-BEC：5V 2.5A
-Uarts：5
-Telemetry ：Supported (UART5)
-INA Pad：nuart2
-CLI config：IFLIGHTF7_TWIN_G.config
-Size :36 * 36mm /30.5 * 30.5mm φ4 mounting
Physical 
- Mounting hole：20*20mm，φ4mm with Grommets φ3mm 
-Size：36*36mm 
SucceX 60A V2 4-in-1 ESC SPECS:
- MCU: STM32F051K66
- Current Sensor: Yes
- Input: 2-6S lipo
- Telemetry: Yes
- Installing Hole: 30.5x30.5mm, M3
- Constant: 60Amps
- Burst: 70Amps
- Weight:16.7g
- Dimensions: 41*41mm
- Mounting Holes: 30.5*30.5mm,M3
- Supports Dshot1200,Proshot,Oneshot,Multishot 
Package Included:
-SucceX F7 V2.1 TwinG FC
-SucceX 60A V2  BLHeli_32 4-in-1 ESC